Innokin Sensis Replacement Pod & Coil

£9.9
FREE Shipping

Innokin Sensis Replacement Pod & Coil

Innokin Sensis Replacement Pod & Coil

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

With the 0.3Ω Z-Coil is recommended between 30 and 40 watts, and primarily designed for a Direct Lung, or Restrictive Direct Lung Vape. The Sensis adopts Fourth-Generation Vape Technology with Alternating Current Mode (ACM). Earlier generations of vaporizers used direct-current to power coils in a single direction. ACM sends electricity through the coil in both directions. This vital upgrade increases the efficiency of heat transfer between the coil and e-liquid, which improves flavor, extends coil life and much more. Innokin are a brand that care with the moral aim of helping those to start a new way of life. Innokin describe their core values as per below. When it comes to charging, its a fairly big battery so expect it to take at least an hour to charge.

Thanks to Variable Wattage mode, you’ll be able to select a power output which produces an amount of power that you feel comfortable with. This means you can either experience a vape that feels closer to a cigarette or one which produces a larger amount of vapour. Thanks to the 510 adapter included, you can also pair this kit with a range of standard vape tanks and use Variable Wattage again to find the correct power output for your tank’s coils. The best F0 frequency depends on your coil and the e-liquid used. Explore the F0 function and find the best frequency for your vape. How Does The Innokin Sensis Perform? The Sensis EZ tank has a top side-fill cap. Simply pop the cap open and squeeze your favourite e-liquid into the tank. It is the simplest way to refill a tank and prevents messy leaking or spilling when filling.

Yes the hype train was strong with this one, there is a Facebook group and a huge campaign outside of the group, for weeks this beauty has been everywhere!

I also think that for the mode to be impactful you need to take at least 2-3 puffs before you start gaining the full effect. Do You Need To Refresh?Now Innokin aren’t new to pod systems, but this is the first time Innokin has slapped the ‘Kroma’ name on a pod kit and added a ‘Z’ on the end for good measure! is the minimum wattage and here the flavour starts to come through for DTL, and creates a nice small cloud. We proudly support reducing cigarette sales worldwide and seek to create a smoke-free world for future generations. We genuinely believe vaping can change a person’s life, and informing others about vaping’s potential is imperative to leaving cigarettes in the past.

First off, it has excellent airflow and can handle all kinds of vaping styles. Innokin did a good day’s work developing a pod and a series of coils that handles most vaping styles. Additionally, the modes earlier mentioned allow for superior flavor. Coils press fit and can go in only one direction with its straight guiders on the pod. As said, you need to fasten the coil with the airflow ring as without airflow ring the device does not recognize the coil. You can replace a coil with the tank half full of you tilt the pod sideways while replacing. Overall I have found the Sensis kit to be an enjoyable experience and there’s a lot to like about it.I also really like how Innokin have pushed through some genuinely useful innovations. OK, I have seen spots of moisture on the metal disk, but as far as actual notable leakage, I haven’t had a problem with it. ProsAll in all I quite like it, it’s ultra-smooth, looks good and has a decent weight to it, thanks to the metal. There is so much to say about the device because it is highly innovative. It comes with two modes that enhance the flavor and extend coil life significantly, and it has several other good features that every good vape should have. When you select F0, you can then select the frequency you wish to use (hz), that replaces the volts in the bottom right of the home screen, and you can now set your wattage like normal. The Innokin Sensis’ Coil+ mode ‘primes’ the coil at the end of each puff by running for an extra 0.4s after your puff at 40% of your selected power. Though the 0.25ohm coil is primarily an RDL/DL coil, I did learn something new along the way. Itturns out you can RDL the 0.25ohm coil at very low wattage which came in handy for me due to having a cough from ‘the vid’.MTL was a real struggle as it made me cough a lot but RDL was doable, and since I prefer 20mg nic salts and less clouds in the house, this turned out to be my saving grace as I could get a high nicotine hit without vaping more.I know this is a personal experience but it’s worth knowing if you wanted to try a different way to vape 20mg nic salts, and I would imagine this method will come in handy when you only have a very short time to get your nicotine fix.

Adapter catches onto the device strongly with a magnetic connection. It is with a tank on top holding on strongly. You can put up to a 28mm tank on top without overhang, but I think it goes best with an MTL tank. This time the pod has a flip open top fill port – replacing the awkward bottom fill port of the original. The INNOKIN SENSIS POD KIT comes with two Sceptre S coils, in both 0.65Ohm and 0.25Ohm. This gives you the chance to try this range of coils, while also giving you control over the taste and flavour production of your vape. These coils can be easily changed by unscrewing the atomizer, and you can refill the whole thing with juice from a small fill port in the bottom of the device. The Sensis Kit comes with a secret power mode that enables users to further increase the flavour of their vape.The screen cover doubles up as a firing bar so you simply press the top part of the screen to fire.This feels superb in multiple hand positions, I preferred grip firing but use whatever suits you.It does feel a little clunky though. Performance It is a very comfortable lightweight pod-mod that just lays nice in the hand and is portable. Even tough I don’t have any major scratches yet, I think they will appear over-time like on the Kroma R, but the paint job is well done and feels nice. I wanted a Tight MTL vape with this one, and at 18 watts with both airflow sliders down very low, I certainly got that tight draw I was after and a satisfying vape to boot. Nothing staggering, but decent.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop